Back to News

News Article - AMADA UK LAUNCHES 3kW ENSIS

WE ARE PLEASED TO INVITE YOU TO THE NEW ENSIS 3kW FIBRE LASER UK LAUNCH

Building on the success of the 2kW ENSIS, AMADA are pleased to introduce the NEW ENSIS 3kW.

        12th-14th September | AMADA TECHNICAL CENTRE KIDDERMINSTER 

At 3kW, the machine offers the industry’s largest single-diode module size. Unlike other machines, there is no diode module beam combiner, thus improving reliability and increasing machine uptime. 

Aside from the large, single-diode module, there are many more advancements in  the 3kW ENSIS.

Firstly, AMADA’s patented ENSIS technology is capable of changing the laser beam mode, not just the focal spot size and focus position. This results in the optimum beam control for thin and thick sheet processing.  The machine also offers single-lens processing for all materials and thicknesses, and features a large-capacity nozzle changer to cover the full range automatically.

This machine is also capable of cutting up to 25mm thick mild steel*, which is equivalent to the performance levels of a standard 6kW fibre laser, but uses just half the power to do the same job. With energy prices proving a major overhead for profiling and fabrication shops, this presents the opportunity to make significant savings.

Among further new features is a development of the ENSIS technology, which provides a high speed pierce in 20mm mild steel, and faster cutting than a 4kW fibre laser. This performance is achieved by instantaneously changing the beam mode between pierce and cut. For piercing materials at the thicker end of the material spectrum, oil-shot functionality is available for added reliability.

The 3kW ENSIS also offers WACS II, the latest version of AMADA’s proprietary Water-Assisted Cutting System. This advanced device allows the amount of water to be varied in two stages, providing further assistance when processing thicker mild steel.

The compact footprint is ideal for both OEMs and subcontract profiling and fabrication shops where every minute counts in the quest to outperform the competition. Integral automation features include cut and pierce monitoring for stable processing, as well as an X-axis conveyor.

The ENSIS machine also provides much lower part costs, by utilising compressed air cutting, compared with standard nitrogen cutting. In fact, cutting  speeds are the same as nitrogen processing, with part quality comparable in many thicknesses. Across a cutting range of 3000 x 1500 x 100mm in the X, Y and Z axes, processing feed rates of up to 100m/min are possible.

For all manufacturers seeking maximum productivity and efficiency from their laser profiling operations, regardless of what type of metal or thickness needs to be processed, the new ENSIS 3kW is the solution!

Full range of new technology also available throughout the event:

  • Lasers
  • Punching
  • Press Brakes
  • Automation
  • Software
  • Tooling

To confirm your attendance, follow our EVENT REGISTRATION,

call us on 01562 749 737 or send us an email info@amada.co.uk

We look forward to welcoming you to the exhibition! 

                                 

 

* Provisional/material specification dependent.